• Presentation in two phases, peroxide and thickener that allows the product to be manipulated only in desired amounts, for example for just one tooth or the whole teeth line and bleaching retouches, avoiding waste.
• The presentation of the product in two phases allows the validity to be longer (two years).
• Versatility combined to the home use technique.
• The complete kit lasts 18 applications.
• The heat blocking in the composition minimizes sensitivity that may be caused by acceleration sources.
• The Kit provides a bottle of enzymatic solution (NEUTRALIZE) which is used when an accidental contact of the peroxide occurs with the skin of the patient.
• Whiteness HP Maxx may be used on the whole arch or individual teeth.
• Excellent viscosity.
• Recommended for vital and non-vital teeth.
• Neutral pH.
• Faster.
• More accuracy in minimizing the sensitivity of the treatment.
• Improved cost-benefit ratio.
• Selection of dyeing pigments which enables a broader spectrum of visible light.
• The mixing system at the moment allows for accurate preparations preventing losses for excess or lack of material.
• Sources of acceleration may be used or not.

• Contains an improved formula along with a group of special dyeing pigments, and inorganic load, that enables more retention of the heating waves from the sources of light avoiding them to reach the dental pulp.
• Just like Whitness HP, the Whitness Hp Maxx also has color transition that finishes in a tone of green, making it easier the visibility while removing it without offering risks of pigmentation.
• The preparation system of the product is identical to the Whitnes HP, where 2 liquid phases are mixed only at the moment of the application.
• Enough gel for bleaching 6 arches (3 applications on each arch).
• Optional use of source of acceleration.
• Contains a broader spectrum for light absorption, the Whitness HP Maxx speeds up the bleaching, which makes the treatment to be more agile, and economic, both for the dentist and for the patient.
• Developed to lower sensibility levels throughout the treatment, an important competitive advantage that provides comfort and safety for the patient.

• Safe, accurate, conservative and aesthetic technique, done in one session
• Can be combined with dental bleaching
• Does not cause tooth sensitivity
• No stain recurrence
• Excellent viscosity
• Gray color to highlight application
• Tips that release enough quantity avoiding waste
• Can be applied manually or with the aid of rubber cup
• Surfaces where micro-abrasion is done developing more resistance to demineralization
• Certified by The EC (European Community)

• Used for chemical and mechanical removal of dental stain by fluorisis, hypoplasia, structural defect or inactive caries.

• Non-toxic ingredients that are soluble in water and specially selected to support lubrication during the polishing procedure which minimizes heat during procedures and enables removal at the end of the treatment.
• Medium viscosity.
• The product performance is not affected by heat.

• The pastes ACI and ACII are recommend to pre-polish and finish resins in general, enamel, metals and amalgams.

• Non-toxic ingredients that are soluble in water and especially selected to support lubrication during the polishing procedure which minimizes heat during procedures and enables removal at the end of the treatment.
• Medium viscosity not affected by heat.
• Multi-use: it can be used in any restorative materials.
• Product certified by the EC (European Community).

• Recommended to polish restorative materials in general, with the support of Diamond or Diamond Flex felt disks.

• The paste has medium viscosity and is not suscetible to the heat action (does not melt).
• Pleasant mint flavor.
• With carbowax, that acts as a lubrificant preventing excessive heat generation.

• Recommended to polish and shine enamel and resins in general.

• Safe, accurate, conservative and aesthetic technique, done in one session
• Can be combined with dental bleaching
• Does not cause tooth sensitivity
• No stain recurrence
• Excellent viscosity
• Gray color to highlight application
• Tips that release enough quantity avoiding waste
• Can be applied manually or with the aid of rubber cup
• Surfaces where micro-abrasion is done developing more resistance to demineralization
• Certified by The EC (European Community)

• Diamond FLEX is recommended to support polishing procedures of restorative materials and dental enamel.

• Dual desensitizer action: the Potassium Nitrate which enables neural actions, and the Sodium Fluoride which provides occlusion action on the dentinal tubules
• Excellent viscosity.
• Product certified by the EC (European Community).

• Recommended for treatment of teeth with moderate to high sensitivity and variance of food and temperature; and dental bleaching sensitivity.
• Remineralization agent after the micro abrasion treatment.
• Does not interfere on the velocity of dental bleaching, therefore can be used before and/or after the bleaching procedure when the hypersensitivity is significant.

• Dual desensitizer action: the Potassium Nitrate which enables neural actions, and the Sodium Fluoride which provides occlusion action on the dentinal tubules.
• No interfere in dental bleaching process acceleration.
• Desensibilize KF 0,2% can be used before, during and after bleaching applications, patients can take the product home.
• Excellent viscosity.
• Transparent gel not interfering in dental bleaching.
• Certified by the CE (European Community).

• Recommended for treatment of low dental sensitivity, before, during and after bleaching, in cases of dentinary hypersensitivity caused by gingival recess or periodontal treatment.

Low viscosity gel with thixotropic properties.
• Blue pigment that enables visibility and control during procedures.
• Mixes well with water, which allows to easy removal after procedures.
• Does not run when applied.
• Certified by the EC (European Community).

• Recommended for enamel and dentin etching in order to improve bonding of restorative materials on tooth surface.

• Mixes well with water, which allows an easy removal after the procedures.
• Great color that enables visibility and control during procedures.
• Adequate viscosity, does not run when applied.

•Superficial etching of dental porcelains and improved restoration procedures. The etching is fundamental for a great interaction between the resin cement and the ceramic piece, enabling a great retention and resistant restorations.
The treatment of the inner surface of the prosthetic pieces should follow indications according to each material classification
Feldspathic Porcelain:
Perform etching with Cond Ac Porcelana for 1 to 2 minutes.
Ceramic Glasses
• Machined: Perform etching with Cond Ac Porcelana for 1 minute
• Pressed / Injected: Perform etching with Cond Ac Porcelana for 20 to 30 seconds.

• The product is sufficiently viscous and thixotropic to allow easy application and control over the place to be protected, without runnings.
• High adhesion isolation.
• Minimum and perfect adhesion on the gingiva.
• Easily detached and removed.
• No gingival tissue irritation.
• Variety of colors, which allows contrast of rubber sheet when used as an auxiliary of absolute isolation.
• Certified by the EC (European community).

• It is indicated to protect the gingival tissue in cases where there is a risk of irritation by contact with products used in the clinical procedure, such as for example dental bleaching with Hydrogen Peroxide at 35% and to help with the complete isolation for a better sealing of a cavity preparation or endodontic treatment.

• Cavibrush is exclusively designed to support applications in difficult access areas such as cavity preparations and root canals.
• Flexible since it bends in two points, reaching angles superior to 180°.
• Cavibrush is available in four tip sizes: Regular, Fine, Extra Fine and Long, allowing applications in various procedures.
• Cavibrush’s stem is slightly thicker, which brings better stability and safety during applications.
• Certified by the EC (European Community).

• Ideal to transfer and apply solutions or products for dental use in gums, teeth or cavity preparations such as: applications of sealant, bonding and desensitizing agents, and etchings.
• Cavibrush Long is perfect for the application of adhesive inside the radicular canal for the cementation of fiberglass posts (White post, FGM)

• Volatile surfactant content in its formula that assists reaching all regions of the cavity.
• Totally easily removed after drying, not interfering with the adhesion of the restoration.
• Certified by the EC (European Community)

• Recommended to perform aseptic procedure of cavity preparations, crown preparations, inlays, etc

• Good and long-term polishing properties with lifelike gloss.
• The mechanical properties follow requirements of restorations on anterior and posterior teeth.
• Excellent radiopacity.
• Lifelike Opalescence.
• Fluorescence balanced to the teeth’s structure.
• Elevated level of conversion.
• Reduces superficial roughness contributing to the maintenance of restorations’ gloss and longevity.
• Ergonomic package, caps fitted to syringes body.
• Low sensitivity to light.

Selection of especial colors developed to fulfill the aesthetic needs of primary teeth which are more opaque and lighter .A,05 and B0,5 son extra opaque, with higher opacity than dentine colors and lighter than A1 and B1.
Recommended for:
• Large spectrum of indications for anterior and posterior teeth enabling the reproduction of optical characteristics of the tooth structure;
• Medium and small sizes occlusal, proximal and occlusal-proximal restorations;
• Class III, IV and V restorations of anterior teeth;
• Direct composite resin veneers;
• Bonding of dental fragments;
• Diastemas can be easily reduced and/or closed;
• One or several teeth can be corrected and/or aligned;
• Structural defects such as Amelogenesis Imperfecta, enamel hypoplasia, non-carious cervical lesions can be treated;
• Correction and/or alteration of tooth height and/or width;
• Restoration of primary teeth;
• Correct and / or change the color of a part or the whole tooth.