Direct restoration with all types of lightcuring restoratives (Ormocer®s, composites, compomers

Ormocer®-based
High adhesion and long-lasting marginal tightness
One component – one layer
Universal for all light-curing restoratives

Filling of small cavities
Fillings with minimally invasive preparation technique
Extended fissure sealing
Blocking-out of undercuts
Lining, coating of cavities (lining technique, CBF-technique)
Cavity classes III and V
Repair of composite fillings and veneers
Luting of full ceramic restorative pieces (porcelain-only-crowns, porcelain inlays)

Optimal flowability (thixotropic):
   fine-flowing during application, stable in the state of rest
• Stress-breaking elasticity
• Exact match of translucency and shade to the packable Admira
• Fine-flowing with excellent wetting capability
• In Caps or syringes with small long cannulae
• Biocompatible
• Low shrinkage
• Time-saving application

For cavities classes I to V
Reconstruction of traumatically affected anteriors
Veneering of discoloured anteriors
Correction of shape and shade for better aesthetics
Splinting, locking of teeth
Repair of veneers
Core build-up
Indirect inlays

• Excellent aesthetics
• High biocompatibility
• Proven for years
• Non-sticky, easy modelling, good marginal adaptation
• Lower shrinkage than conventional composites
• Tooth-like thermal expansion behaviour
• Excellent adhesion to dentine and enamel with Admira Bond
• Abrasion-resistant and stable colours
• Ideal for all cavity classes

Treatment of hypersensitive dentine (dentine hypersensitivity)
Treatment of cervical areas and crown margins
Treatment of cervical areas after professional cleaning and calculus removal

• Permanent elimination of hypersensitivity
• Reliable adhesion
• Biocompatible
• Special filler technology for high abrasion proofness
• Fluoride release

Dentine sealing under amalgam fillings
Sealing of cements before applying amalgam
Sealing of amalgam fillings immediately after application

• Effective protection of the pulp
• Insulation against chemical and bacterial influences
• Reduces the risk of leakage and secondary caries
• Binds excess mercury

Aesthetic restoration of class III, IV and V cavities in anterior teeth
Aesthetic restoration of class I, II and V cavities in posterior teeth
Reconstruction of traumatically damaged anterior teeth
Direct and indirect composite veneers and facing of discoloured anterior teeth
Shape and shade correction for improved aesthetics
Repairing highly aesthetic porcelain, e.g. veneers
Direct and indirect composite inlays
Splinting of anterior teeth

• The ideal addition to Amaris®
• Simple modelling of the incisal edge
• Easy wetting
• Fine cannula allows to apply small amounts

Class V restorations (cervical caries, root erosion, V-shaped
defects) especially in cases of retreating gingiva e.g. as a result
of periodontic desease
Covering of exposed discoloured hypersensitive necks of teeth,
especially in the visible anterior area
Highly aesthetic correction of malpositions of teeth, for direct
veneers, facings and corrections of the red-white aesthetics

• One base shade, combined with 3 mixable opaquers, can reproduce almost all gingival shades
• Aesthetic and functional solution for cavities and V-shaped defects in cervical areas exposed by gingival recession
• Latest composite technology – Amaris® know-how in gingiva shades

For cavities classes I to V
Reconstruction of traumatically affected anteriors
Veneering of discoloured anteriors
Correction of shape and shade for better aesthetics
Splinting, locking of teeth
Specifically suited for composite inlays

• High abrasion resistance and stability
• Good packability and shaping
• Good aesthetics and shade adaptation to the tooth
• Excellent polishability
• Universal for all cavity classes
• Sintraglass multifiller system

Filling of small cavities
Extended fissure sealing
Filling of cavities class III and V
Lining, coating of cavities
Repairing composite fillings and veneers
Luting of full ceramic restorative pieces

• Fine-flowing with excellent wetting capability
• Very good aesthetics (chameleon effect)
• Thixotropic properties
• High adhesion with Solobond M
• Precise application
• Economical

Core build-up
Restoration of deciduous teeth
Build-up fillings and lining

• Very good radiopacity
• Continuous high fluoride release
• High compressive strength
• Simply mixed with water
• All ingredients pre-dosed in powder form
• No overacidification

Core build-up
Temporary long-term restoration of class I and II cavities
Build-up fillings and lining
Restoration of deciduous teeth
Retrograde root filling

• Packable
• Non-sticky consistency
• Highly radiopaque due to fine disperse silver particles
• Very high abrasion resistance, compressive and transverse strength
• Safe adhesion to dentine and enamel
• Continuous high fluoride release
• In direct application capsules

Bondfix is suited for direct restorations using light-curing filling materials in all cavity classes.

• No postoperative sensitivities
• High bond strengths on enamel and dentine
• No shaking, no massaging
• Tolerates moisture

Direct capping when the pulp is opended or a pulpotomy is performed
Indirect capping for the treatment of caries profunda
Lining of cavities to prevent exposure to acid media when using cements
For temporary filling of root canals

• Ready-to-use
• Contains 45% calcium hydroxide
• Antimicrobial effect through high pH-value (over 12.5)
• Effective protection of the pulp
• Radiopaque
• Suitable under all lining and filling materials
• Promotes the formation of tertiary dentine

Indirect pulp capping
Lining under all filling materials

• Effective protection of the pulp
• Easy application
• Suitable working time
• Short setting time
• Contains 26% calcium hydroxide
• Radiopaque
• Supports the formation of secondary dentine

Indirect pulp capping
Lining under all filling materials
Protection when applying the total-etch technique

• Time-saving direct application and light-curing
• Ready-to-use one-component material
• Effective protection of the pulp
• Acid-resistant
• Supports the formation of secondary dentine
• Calcimol LC in the new NDT®-syringe
 NDT® means non-dripping-technology
 Especially for fine-flowing materials
 Can be dosed and applied precisely
 Without any loss of material

Direct repair of ceramic restorations

• Only one session
• No removal or re-cementation of restorative pieces
• Simple working steps
• No etching
• No additional devices required
• Permanent bond of composite to porcelain
• High shear bonding strength

• Excellent polishing results
• Suitable for all composites - also for those of the latest generation
• Diamond-interspersed for efficient polishing
• Minimised outlay for instruments; pre-polishing and high gloss polishing with only one polisher
• Autoclavable and thus reusable
• Available in five different shapes for precise and individual polishing
• Can be used with or without water cooling

Surface sealing of glass ionomer cements, provisional crowns and bridges and definitive composite restorations
Protecting glass ionomer cement surfaces against the effects of moisture and dehydration immediately after placement
Sealing glass ionomer cement liners/build-up restorations before taking impressions
Sealing and protecting adhesive interfaces between restoration and tooth structure

• Glossy and aesthetic surfaces
• Easy to use
• Provides protection against discolouration
In combination with VOCO Ionofil Molar AC / Quick:
• Protects against moisture and dehydration immediately after filling placement
• Tooth-like fluorescence
• Natural gloss

Sealing of pits, fissures and occlusal surfaces for caries prophylaxis
Facing of damaged enamel surfaces
Anchoring of orthodontic appliances
Sealing of composite and cement fillings (protection against moisture)
Restoration of small carious lesions
Repair of small defects in composite and amalgam fillings

• Transparent
• High stability and good adhesion to enamel
• Clinically proven for years

• Sealing of pits, fissures and occlusal surfaces for caries prophylaxis
• Facing of damaged enamel surfaces
• Anchoring of orthodontic appliances
• Sealing of composite and cement fillings (protection against moisture)
• Restoration of small carious lesions
• Repair of small defects in composite and amalgam fillings

• Quick and direct application from the new NDT-syringe
• White for application control
• Excellent flow properties and low viscosity
• High stability and good adhesion to enamel
• Perfect marginal adaptation
• Clinically proven for years
• Continuous fluoride release
Fissurit F in the new NDT®-syringe
• NDT® means non-dripping-technology
• Especially for fine-flowing materials
• Can be dosed and applied precisely
• Without any loss of material
Now as a new set with etching gel and etching liquid
• Etching gel for tooth surfaces and large fissures
• Etching liquid; penetrates deep fissures faster due to low viscosity